Group IX.
Plate 11.
STOOL
Group IX.
Plate 12.
TABORET
Group IX.
Plate 13.
TABORET
Group IX.
Plate 14.
SMALL TABLE
Group IX.
Plate 15.
TABORET
Group IX.
Plate 16.
PIANO BENCH
Group IX.
Plate 17.
PIANO BENCH
DETAIL OF
JOINT AT A-B
ENLARGED
Group IX.
Plate 18.
BOOK STAND
END OF
LOWER SHELF
END OF
MIDDLE SHELVES
DETAIL OF JOINT
AT A-B
Group IX.
Plate 19.
UMBRELLA STAND
COPPER
DRIP PAN
Group IX.
Plate 20.
UMBRELLA STAND
Group IX.
Plate 21.
JARDINIERE STAND
Group IX.
Plate 22.
MAGAZINE STAND
Group IX.
Plate 23.
ROMAN SEAT
Plate 24.
LIGHT STAND
Group IX.
Plate 25.
STOOL
DETAIL
OF CORNER
Group IX.
Plate 26.
BOOK TROUGH
DETAIL OF TROUGH BACK
Group IX.
Plate 27.
SCREEN
Group IX.
Plate 28.
TEA TABLE
Group IX.
Plate 29.
HALL RACK
MIRROR
Group IX.
Plate 30.
WALL CHINA RACK
DETAIL OF A-B
Group IX.
Plate 31.
SIDE CHAIR
Group IX.
Plate 32.
ARM CHAIR
Group IX.
Plate 33.
MORRIS CHAIR
Group IX.
Plate 34.
ELECTRIC READING LAMP
SECTION AT A-B
Group IX.
Plate 35.
PEDESTAL
EGG AND DART
SECTION AT A-B
Group IX.
Plate 36.
OCCASIONAL ROCKER
Group IX.
Plate 37.
MISSION CHAIR
Group IX.
Plate 38.
DROP LEAF TABLE
DETAIL OF
JOINT AT A-B
Group X.
Plate 39.
EXERCISE—PREPARATORY TO GROUP X
MORTISE AND TENON-RABBETED HAUNCHED MORTISE AND TENON-GROOVED
SAW KERF SAW KERF
Group X.
Plate 40.
EXERCISE—PREPARATORY TO GROUP X
THRU MULTIPLE DOVETAIL HALF-BLIND DOVETAIL
Group X.
Plate 41.
WASTE PAPER BOX
Group X.
Plate 42.
WALL CABINET
DETAIL OF SHELF
AT A-B
Group X.
Plate 43.
TELEPHONE TABLE
Group X.
Plate 44.
SEWING CABINET
Group X.
Plate 45.
WRITING TABLE
Group X.
Plate 46.
CHAFING DISH STAND
Group X.
Plate 47.
CABINET
Group X.
Plate 48.
LIBRARY TABLE
Group X.
Plate 49.
WRITING DESK
COMMERCIAL DESIGN
Group X.
Plate 50.
DRESSING TABLE
Group X.
Plate 51.
LINEN CHEST
SECTION AT A-B
Transcriber’s Notes
Depending on the hard- and software used and their settings, not all elements may display as intended. Some forms, tables and illustrations may not display properly in a narrow window or on a narrow screen.
Except as mentioned under Changes made below, the language used in the source document has been retained, including unusual, archaic and inconsistent spelling, hyphenation, capitalisation, etc. Errors, discrepancies and ambiguities in (cost) calculations have not been corrected unless mentioned below.
Page 74, Fig. 8: the scale at the top of the drawing represents 3′.
Page 78-79, price calculations: The source document gives .00 for the price of the chisel-board.
Page 110, (Mechanical Drawing 12 weeks ...: there is no closing bracket in the source document.
Page 211, Plate 24: the Group number is not included in the caption.
Changes made:
Illustrations, forms, tables etc. have been moved out of text paragraphs.
Some obvious minor punctuation and typographical errors have been corrected silently. × and x in multiplications and dimensions have been standardised to ×. In several forms and tables some of the ditto marks (“) have been replaced with the dittoed text.
Part III: project names, project part names and construction instructions from the drawings have been transcribed for the sake of clarity and legibility; measurements and descriptions of minor constructive elements such as screws and nails have only been transcribed when needed. The most important text elements from the illustrations in the text chapters have been transcribed as well in a dashed box.
Page 38, caption with Fig. 4: October 1808 changed to October, 1908
Page 97, paragraph starting Instructor assigns ...: indented like similar paragraphs.
Page 128-129, Heading Woodworking Group VIII considered to be part of heading Grade VIII as on previous pages.
Page 155: STOCK--3⁄4′ THICK changed to STOCK--3⁄4″ THICK