WeRead Powered by ReaderPub
History of electric light cover

History of electric light

Chapter 48: INCANDESCENT LAMP DEVELOPMENTS, 1894–1904
By Henry Schroeder
Open in WeRead

Explore more books like this:

Engineering & TechnologyHistory - Modern (1750+)

About This Book

A chronological, technical survey of electric lighting traces developments from early experiments with friction machines, Leyden jars and voltaic piles through advances in batteries, electromagnetic discoveries and the invention of the dynamo. It follows the parallel evolution of arc and incandescent illumination, outlining experimental filament and arc-control methods and the move to commercial installations and distribution schemes such as series, multiple and three‑wire systems. Later sections review later lamp technologies—Nernst, mercury‑vapor, gas‑filled and tungsten types—together with transformers, rectifiers, standardized voltages and sockets. The book is illustrated and includes a chronology, cost and usage statistics, and a selected bibliography.

INCANDESCENT LAMP DEVELOPMENTS, 1894–1904

With the development of a waterproof base in 1900, by the use of a waterproof cement instead of plaster of Paris to fasten the base to the bulb, porcelain at first and later glass being used to insulate the terminals of the base from each other, lamps could be exposed to the weather and give good results. Electric sign lighting therefore received a great stimulus, and lamps as low as 2 candlepower for 110 volts were designed for this purpose. Carbon lamps with concentrated filaments were also made for stereoptican and other focussing purposes. These lamps were made in sizes from 20 to 100 candlepower. The arc lamp was more desirable for larger units.

The dry battery was made in small units of 2, 3 and 5 cells, so that lamps of about ⅛ to 1 candlepower were made for 2½, 3½ and 6½ volts, for portable flashlights. It was not however until the tungsten filament was developed in 1907 that these flashlights became as popular as they now are. For ornamental lighting, lamps were supplied in round and tubular bulbs, usually frosted to soften the light.

The Moore Tube Light, 1904.

This consisted of a tube about 1¾ inches in diameter and having a length up to 200 feet, in which air at about one thousandth part of atmospheric pressure was made to glow by a very high voltage alternating current.