How to Tie Flies

{32}

NYMPHS AND THEIR CONSTRUCTION

NYMPHS

Nymphs are larvae of all aquatic insects. Together with minnows, crawfish, etc., they represent about ninety per cent of the trout's regular diet. Considering this fact, it is obvious that nymphs will take trout throughout the entire season. It will greatly surprise the novice to learn of the great amount of underwater insect life present in any stream. Next time you go fishing, hold your landing net close to the bottom, in a foot or so of fast water. Reach upstream and loosen the stones and gravel. Raise your landing net, and notice the numerous nymphs that have been washed from under the stones, and have attached themselves to your net. Better still, make a screen about two feet square, from regular 14 mesh window screening. Hold this in the water, and have your fishing partner go upstream, and with a regular garden rake, or some such tool, rake up the bottom, turning over the stones and gravel. This way you can capture many nymphs. Put them in glass bottles, take them home, and make copies of them. When next you {33} go fishing open the first trout you catch, examine the contents of its stomach, and determine which of the copies you have made is the proper nymph or fly for the occasion. To fish with an imitation of the fly or nymph upon which they are feeding, will result in a heavier creel.

When nymph fishing it is important to use a long, finely tapered leader. A 4x is about right. Fish in the same waters, and very much the same way as with a dry fly except that the nymph is allowed to sink. Fish upstream, or up and across the current. In the ripples. Around boulders. At the edge of fast water. Let the nymph drift with the current. Follow it with your rod tip, and be prepared to set the hook at the least hesitation of the line. Trout will sometimes take a drifting nymph and eject it, without being felt on the most delicate rod, so be ever on the alert when nymph fishing. A nymph fished down stream, and retrieved with slow, short jerks, will often work very well. When fished in this manner, trout will strike quite hard, and usually hook themselves.

There are times when trout are rolling on the surface and it seems impossible to take them on anything. It is then that they are usually feeding on nymphs, just under the surface. I remember one such time on the Housatonic River in Connecticut last summer. Just at dark, I was standing knee deep in very fast water. Trout {34} were breaking all around me. I knew, they were feeding on nymphs, and tried in every way to catch them. The water was so fast, it was impossible to keep the nymph just the right depth below the surface. I tried every trick that I knew, but could not get a strike. Finally reaching my hand in my pocket, I discovered several large buckshot. Removing the nymph from the tip of the leader, I attached five of these large shots, to the very tip of the leader, with a piece of 3x gut tippet about four inches long. I connected the nymph to the leader about sixteen inches from the tip. Within the next few minutes I took several nice trout, within rod's length of where I was standing. What actually happened, the lead was so heavy that it immediately sank straight to the bottom, and my taut line held the nymph suspended about two inches below the surface. The short gut between the nymph and the leader allowed the nymph to quiver much as the natural was doing. All the various common nymphs can be faithfully copied, by learning to tie the various styles of those herein illustrated. Simply alter the sizes, and color combinations, according to those found in the waters where you fish.

Remember nearly all the nymphs have flat bodies, and dark backs. The bodies may be flattened by thoroughly lacquering them, and when nearly dried squeezing them flat with an ordinary pair of pliers; or by {35} cutting a piece of quill the shape of the body from a turkey or goose wing. Bind this on top of the hook for the foundation of the body, and build the body over this. When finished, lacquer the entire body.

Most any body materials that are used for the making of other flies can be used; however, wool is mostly used for nymphs. Silk floss wound over a quill foundation and then lacquered, makes a very smooth, realistic body.

{36}

Diagram 6

{37}

THEIR CONSTRUCTION (SEE DIAGRAM 6)

Start tying silk (A) an eighth of an inch from the eye of the hook and wind closely down shank, as previously done with bucktails, wet flies etc. Next cut a section (B) from a grey goose wing feather about one eighth inch wide, and tie on top of the hook as Fig. 1. This is to make the tail and also the back of the nymph. Bend (B) back and take a turn or two with (A) in front as Fig. 2. Tie in the ribbing (c) close to (B) Fig. 3. Next tie in body material (D) close to (C) Fig. 4. Wool yarn makes the best body material for this style nymph. Now finish the body as for a wet fly, Fig. 5, then pull (B) tightly over the top, finish off as Fig. 6. This makes a sort of hard shell over the back. Next turn the hook upside down in the vise, and lay three horse hairs across, just in back of where the head is to be made, crisscross (A) between the hairs to spread them and make them look like legs, and your nymph should look like Fig. 7. Nymphs of this style as well as Figs. 8, 9, 10, 14 and 15 look more natural if the bodies are flattened. Fig. 8 is tied nearly the same as Fig. 7, the difference being that (C) and (D) are both wound over (B) about two-thirds of the length of the body, then (B) is turned back, the body finished as before, (B) brought forward loosely to form the humpbacked wing case, and (B) being cut off as was done with Fig. 6, and instead of the butt end of (B) being cut off as was done with Fig. 6 it is split by crisscrossing (A) through it to form small wings as Fig. 8. Fig. 9 is made in the same way except that several strands of peacock herl is used for the dark back, tail, and feelers.

Fig. 10 is a very effective nymph, the body made entirely of natural raffia (soaked in water before using), with black hair used for the tail and feelers The body coated with lacquer as before mentioned and pressed flat when dry; paint the back with dark brown or black lacquer.

Fig. 11 is made by close wound palmer hackle cut off on dotted lines. Fig. 12 is a fur body, made by spinning rabbit's fur or other fur on waxed tying silk and ribbing with gold; the tougher this nymph looks the more effective it seems to be. Fig. 13, the Caddis {38} worm can be more naturally reproduced with a common rubber band than any other way I know. Get a dirty, white, rubber band about 1/8" wide, taper one end for about 1/2". Lay two horse hairs lengthwise on top of the hook for the feelers, wind tying silk over them down the hook, tie in the rubber band by the very tip of the taper, wind the tying silk back to the starting point, and be sure that the tying silk is wound smoothly. If not, any roughness will show through the rubber band. Wind the rubber band tightly to about 1/4" back of the eye. Wind back down and take one turn under the horsehair at the tail end, wind up to the head and tie off with the tying silk. This now makes three thicknesses of the rubber band. Form a large head with the tying silk, fasten securely and you have a very realistic Caddis worm. Fig. 14 is tied about the same as Fig. 7, with a considerable amount of speckled mallard, and peacock herl used for both the front and back feelers as well as the legs.

Fig. 15. The Damsel Nymph has a body of dark grey wool with a back of dark brown or black lacquer. Wings, small red-brown wood duck breast feathers, feelers dark brown hackle, and a large black head.

{39}

THE HELGRAMITE (SEE DIAGRAM 7)

The Helgramite Nymph, larva of the Dobson Fly, is such an excellent bass and trout food, that the making of this nymph deserves special mention. As my personal way of making this particular nymph differs considerably from those previously explained, I consider it advisable to go into further details concerning the construction of this pattern.

I personally like the winged style. That is, with small imitation wings and horns, or feelers. This represents the nymph in its final underwater stage, just before emerging from the water as the Dobson Fly. I find black skunk tail the most satisfactory material for the body of this nymph. Either light grey swan sides, or light grey pigeon breast feathers for the wing and legs.

{40}

Diagram 7

{41}

First wind the waxed tying silk up the shank of the hook beginning opposite the barb. Clip the fibers closely from a couple of hackle feathers. These are to form the horns. Bind these hackle quills to the top of the hook, so that the tip ends project about 1 1/2" in front of the eye. Take a bunch of black skunk tail about the size of a match and bind it to the top of the hook, with tip ends towards the eye of the hook as in Diagram 7, Fig. 1. Next fold the hair forward and bind down tightly as in Fig. 2. Again fold the hair back and tie down as in Fig. 3. Then again as in Fig. 4. Notice that each time the hair is folded back upon itself and tied down, that it forms a segment of the body, and that each segment increases in size, until your nymph looks like Fig. 5. At this stage turn the nymph over and tie a piece of light grey feather about 1/8" wide across the bottom, separate the fibers with the tying silk to form the legs. Now cut a small light grey pigeon feather with the centre quill, as dotted line in Fig. 6. Give this a coat of clear lacquer: when dry, tie flat, on the back of the nymph to form the first set of wings, as in Fig. 7. Cut another feather and treat the same way, tie these slightly forward of the first set of wings, and you have a Dobson Nymph that is very lifelike in appearance.

{42}

BASS FLIES AND FEATHER STREAMERS

It will appear obvious from a study of Diagram 8, page (43) that the tying of bass flies and Feather Streamers differs so little from the tying of wet flies and bucktails that a detailed description will be unnecessary.

Bass flies are little more than large trout lies, the principal difference being the feathers that are used for the wings although the same feathers can be used as for trout flies. It is customary with commercial tiers to use two whole feathers for the wings, or the tips of two wings feathers, etc. Place the concave sides together and tie in the butt ends the same as for a wet fly. Bass flies to be used as spinner flies, that is, flies to be used with a spinner in front, should be tied on ring eyed hooks instead of hooks with turned down or turned up eyes.

{43}

Diagram 8

{44}

Page sized photograph of flies tied by the author (actual size)

{45}

Certain patterns of these flies have for a long time been famous as salmon flies in northern New England and Canada and the past few years have seen them steadily growing in popularity with anglers of Connecticut, especially for Rainbow Trout. The feathers that are used for wings are saddle hackles, and from four to eight feathers are used, hackles of the same size are selected, the tip ends placed even, and the concave sides of those used for the left side are placed next to the concave sides of those used for the right side, in other words, both the right and left side of the wing will be convex, or outside of the feather. Any of the standard pattern flies can be tied as streamers. Some of the patterns however, are very elaborate flies; the Supervisor, for instance, has wings of light blue with shorter feathers of green on each side, with peacock herl along each wing, polar bear hair, jungle cock shoulders, a silver body, and a red tag. This fly was developed a few years ago by Mr. Joseph Stickney, Supervisor of Wardens, State of Maine, to imitate the smelt, a natural salmon food. The riginal Supervisor did not have the jungle cock or the peacock heal. Mr. Stickney suggested the addition of these feathers to me last year, and I believe that this is now the approved dressing.

{46}

Feather Streamers tied by the author (actual size)

{47}

FAMOUS BUCKTAIL AND FEATHER STREAMERS

SUPERVISOR: WINGS, Blue saddle hackle with polar bear hair, and peacock herl down each side. CHEEKS, green hackle tip and jungle cock. BODY silver. TAG, red wool.

TIGER: (light) WINGS, brownish yellow bucktail or red squirrel tail. BODY yellow chenille. TAG, gold. TAIL, barred wood duck. CHEEKS, jungle cock. THROAT, scarlet.

TIGER: (dark) WINGS, yellow bucketful. BODY peacock herl. TAG, gold. TAIL, barred wood duck. CHEEKS, jungle cock. Short red fin.

GREGG'S DEMON: WINGS, grizzly saddle hackle dyed brown. BODY, silver ribbed with gold. CHEEKS, jungle cock. TAIL, barred wood duck. TOPPING, golden pheasant crest. HACKLE, Orange.

JUNGLE PRINCESS: WINGS grizzly saddle hackle dyed yellow with large jungle cock. CHEEKS, blue chatterer. BODY gold tinsel. HACKLE, white.

GRIZZLY GREY: WINGS, grizzly saddle hackles. CHEEKS, jungle cock. TAIL, orange. BODY, silver tinsel. HACKLE, white bucktail.

{48}

HIGHLAND BELLE: WINGS orange saddle hackles inside, grizzly saddle hackles outside. CHEEKS, jungle cock. BODY, gold tinsel ribbed with silver tinsel. HACKLE, white bucktail.

SPENCER BAY SPECIAL: WINGS blue saddle hackles inside with furnace saddle hackles outside. CHEEKS, jungle cock. TAIL, golden pheasant tippet. BODY, silver tinsel ribbed with oval silver tinsel. HACKLE, yellow and blue mixed.

BLACK GHOST: WINGS, white saddle hackle. BODY, black silk floss ribbed with silver. CHEEKS, jungle cock. HACKLE, yellow.

GREY GHOST: WINGS, grey saddle hackle with peacock herl and white bucktail. BODY, orange floss ribbed with gold. CHEEKS, silver pheasant feather and jungle cock.

BROWN GHOST: WINGS, brown saddle hackle. BODY, brown floss ribbed with gold. CHEEKS, jungle cock. TOPPING, golden pheasant crest. TAIL, golden pheasant crest. HACKLE, yellow.

WARDEN'S WORRY: WINGS one red and one grizzly saddle hackle. HACKLE, yellow, tied very full.

WHITE MARIBOU: WINGS, white caribou. CHEEKS, large jungle cock and small red feather. TOPPING, golden pheasant crest.

YELLOW MARIBOU: WINGS, yellow caribou. CHEEKS, large Jungle cock and small red feather. TOPPING peacock herl. Two complete caribou feathers can be used, or sections of the feathers, depending upon the size of the hook. Size 4 long shank hook is a good size to tie them for salmon.

{49}

FLOATING BUGS AND THEIR CONSTRUCTION

A style of fishing becoming more popular each year is that of Fly Rod fishing with Floating Bugs. These Bugs represents the large moth, butterfly, etc., and are constructed of a large variety of materials. Some have cork bodies. Some have Balsa Wood bodies. Others all hair bodies. Bodies covered with chenille, and other materials. One of the easiest to make and I believe one of the most successful styles, is entirely constructed from the body hair of the deer, reindeer, or caribou. All of these hairs are rather coarse and hollow consequently are very buoyant, and when properly made into a copy of the living insect, they have a soft, lifelike body that appears very natural when taken by a fish. These soft bodied Bugs are not so apt to be ejected before the Angler has time to set the hook, as are those with hard bodies.

{50}

Bass Bugs tied by the author (actual size)

Although the object of this book is to teach the Angler how to tie his own flies a few words in regards to the writer's personal experiences in using these Bugs might not be amiss at this time. Floating Bugs are mostly tied on large size hooks and generally used for {51} bass. However, I have had a great deal of luck and many pleasant experiences with them tied as small as a #14 Model Perfect hook, and used with a 4x Leader. The small sizes will take many large trout, and are readily accepted by all pan fish. When fishing in still waiters with the Floating Bugs, whether it be for bass, pickerel, trout or pan fish I use a light leader, treated so that it will sink. I cast to a likely looking spot, beside an old stump along lily pads, or to an opening in the lily pads themselves. I let the Bug hit the water with quite a splash, as a living moth of the same size would, and there I let it lie, absolutely motionless, as though stunned by the blow. By all means do not be impatient, let the Bug lie perfectly still for two or three minutes, and then simply move the tip of your rod just enough to cause the Bug to quiver on the surface. Again let it lie perfectly still for a minute or two; usually about the second time the Bug is made to quiver you can expect a strike, and when a big bass comes after one of these Bugs, he comes full of action. When fishing fast water, I fish them exactly as I would a dry fly, upstream or up and across the current. My personal choice for color is the natural brownish grey body hair from either the deer, reindeer, or caribou. Wings, tail and body all the same natural color. I tie this pattern from size 2/0 Model perfect hook down to size 14, and us {52} the larger sizes for bass and pickerel, and the smaller sizes for trout and pan fish. I remember one very pleasant experience that happened in northern Maine three years ago. There is a small, deep, spring fed lake of about ten acres in area, completely surrounded by wilderness; this lake had been stocked with, Rainbow Trout and closed to all fishing for five years. I was fortunate in being there about two months after it had been opened to fishing and was invited to try my luck, after first being advised that although some very nice catches were regularly being taken on a Streamer Fly fished deep, also on live bait and worms with a spinner, no one had even been able to take fish on the surface. I arrived at this lake about one hour before dark, and it was one of those evenings when the water was actually boiling with rising trout. In fact never before or since have I seen so many fish breaking water at the same time. I immediately made up my mind to take fish on the surface. I began fishing with a small spider, and changed fly after fly for the next half hour with the same results as had been experienced by other dry fly fishermen. In desperation and with darkness fast approaching I tied on a size 4 Grey Bug and cast about thirty feet from shore. The Bug hit the water with quite a splash and didn't even as much as put down one fish, and several continued to {53} rise from within a few inches to a few feet from where the Bug landed. I waited a couple of minutes and gave the Bug a little twitch, nothing happened, again I twitched and again nothing happened. I began to believe I was stumped when again the Bug was moved ever so slightly for the fifth time, and remember this was at least seven minutes after it first hit the water. A fish struck. In a few minutes I landed a 2 1/4 pound Rainbow. Before darkness had brought the day to a close I had landed three more beautiful Rainbows averaging 2 pounds each. I had never since had the opportunity to fish in this beautiful little lake. Some day I hope to return, and again try, and I believe succeed in taking these beautiful Rainbow Trout on the conventional dry fly. However, this one little experience proved conclusively to me the absolute necessity of patience in fishing Floating Bugs.

FLOATING BUGS: THEIR CONSTRUCTION (SEE DIAGRAM 9)

First let us begin by making the most simple; that is, one that has the Body, Wings, and Tail, all of the same material and color. Follow the illustrations carefully and even your first attempt will be a masterpiece.

{54}

Although I use well waxed 00 tying silk, you will find that regular sewing silk size A will work best on your first attempt. First wax your thread thoroughly and take a few turns around the shank of the hook and tie in a small bunch of hairs for the tail, as in Diagram 9, Fig. 1, page (55). We will assume that we are using regular deer hair cut from the hide. Next clip a small bunch of hairs, about the size of a match, close to the hide. You will notice there is some fuzz mixed with the hair at the base close to the skin, pick out the fuzz and place the butts of the hairs under the hook as in Fig. 2, Take a couple of loose turns with the tying silk, hold the tips of the hair with the thumb and finger of the left hand, and pull the tying silk down tight. You will notice that the hairs spin around the hook and the butt ends will stand out pretty much at right angles to the hook, as in Fig. 3. Cut off the tip end of the hairs on the dotted line, press the hairs back tightly, apply a drop of water-proof lacquer to the base of the hairs and the hook, and repeat the same process of tying on a small bunch of hair, each time pressing it back tightly. Remember this is important, because the hair must be as close together as possible to make a firm, smooth, buoyant body.

{55}

Diagram 9

{56}

When you have built the body up until it looks something like Fig. 4, remove it from the vise and with a sharp pair of scissors trim and shape it until it looks like Figs. 5 and 6. At this stage you should have 3/16" of the shank of the hook left just behind the eye, where you will tie on the wings. Cover this bare hook with the well waxed tying silk, and lay a bunch of hair on top of the hook for wings as Fig. 7. Crisscross the tying silk around the wings and the hook until they are securely tied together. Place several coats of lacquer over he junction of the wings and hook, to more securely bind them in place. Lacquer the entire wings if you wish and when they have partially dried, press them flat, spread them, trim them as Fig. 8, and your Bug is completed.

Any combination of color may be used, different colored wings and tail, different colored rings in the body. White body with red tail and wings is a good pattern. Yellow body, black wings and tail another. Various feather combinations can be used for wings and tall. Create your own designs, and develop your patterns.

{57}

CORK BODIED BASS BUGS (SEE DIAGRAM 10)

These high floaters are easy to make and may be tied on most any size hook desired. Kinked shank hooks should be used to prevent the body from turning on the hook. Colored lacquer or enamel can be used to decorate the bodies, and eyes can be either painted on, or regular small glass eyes inserted and held in place with water-proof glue or lacquer. Any of the fancy feathers that are used for regular bass flies can be used for wings. Hair or feathers can be used for tails, etc. Let us first make one of these cork bodied Bugs on a size 1/0 hook. Take a 1/2" cork cylinder and with a razor blade shape it roughly as Diagram 10, Figs. 1 and 2. Then with a piece of 00 sandpaper held in the right hand and the cylinder in the left it is a very simple matter to give the body a nice smooth, shapely finish. Next cut a small V out of the body as in Fig. 3. This is easier to fit to the hook and easier to cement securely than simply making a slit in the cork. Press the V slit over the hook as in Fig. 4. Apply cement or lacquer liberally to the inside of the V slot, and to the hook shank. Press the piece that was removed securely back into place, bind tightly with string, as in Fig. 5, and let set over night. Next day when the cement has thoroughly dried and the body is permanently fastened to the hook, remove the string and with the sandpaper touch up any rough places on the body, and give a coat of lacquer or enamel of the desired color.

{58}

Diagram 10

{59}

When the body enamel has dried, take a pair of feathers for wings (whole feathers that have the quill in the centre, same as are used for regular bass fly wings are best), and with the tying silk bind these fast to the top side of the shoulders as in Fig. 6. Tie on a tail close to the body, paint on the eyes, paint any other color or designs you wish on the body, and the Bug is completed.

{60}

Diagram 11

{61}

ANGLER'S KNOTS

Figs. 1, 2 and 3 in Diagram 11, page (60) show a very convenient way to tie a dropper loop in the leader; roll the gut between thumb and finger at (A) Fig. 1, next invert loop (B) through (C) Figs. 2 and 3.

Figs. 4, 5, and 6 make the best knot for or a loop in the end of a leader, gut snells etc. Pull loop (C) through loop (B) Figs. 5 and 6.

Figs. 7, 8, and 9 are about the easiest and most secure knots for making leaders, the ends are in the centre of the finished knot and can be clipped close.

Figs. 10, 11, and 12, the figure eight knot, is the best for tying flies to the leader, it won't slip, and the pull is in line with the hook shank.

{62}

MY FAVORITE FLIES

Quite frequently I am asked which fly I like the best, or which particular patterns I would choose should I carry only a few flies with me on a trip. That is rather a difficult question to answer. The season, the type of fishing and location must be taken into consideration.

There must be some reason for so many hundreds of patterns. I hardly believe that any half dozen patterns can be used with constant success throughout the season, even in one particular locality. There are times, when fish are feeding, that they will take anything; again one may change fly after fly without success, when finally a fly will be tried that will take fish on every cast. Suppose that particular fly wasn't included in the chosen few, the answer is obvious.

However, I will endeavor to choose six patterns each of the various styles, and to give my reasons for their choice, but here I assure you there will always be many more patterns in my fly box for further trial, after I have exhausted my favorite six.

Beginning with dry flies, my first choice would be {63} a Quill Gordon, on a size 16 hook. This fly closely represents the numerous duns that are on or about the water, to some extent, during the entire season. I have little faith in color in the dry fly, except light or dark shades. I do believe that the size and shape have a great deal more to do with the success of a dry fly than color. I have proven to my own satisfaction that a Quill Gordon sparsely dressed as it should be, but tied with a black hackle and yellow mallard wings, is just as successful as the customary dressing.

My second choice would be the Red Ant. Although this fly belongs to the order Hymenoptera, it can be used when many of the Diptera order are on the water, such as Cowdung, Blue bottle, Bee, etc. This family all have flat wings and make an entirely different appearance than the aforementioned Quill Gordon. I tie the Red Ant on a size 14 hook. I build the body first of red silk floss, shape it like the body of an ant, give it a couple of coats of clear lacquer and let it dry hard and shiny. This body will reflect light, much as the natural insect. I then tie on two hackle tips for wings. Have them about as long as the hook, spread them so they are at about a 30 degree angle from the body and very flat. I then use a brown saddle hackle with fibers about 3/4" long for legs. I put on only two or three turns of the hackle, and then clip off all of the top and bottom hackles, leaving only about six fibers sticking {64} straight out on each side. This fly will float very close to the water, and because of its sparse dressing, slightly heavy body because of the lacquer, it is not a good floater. It also has the disadvantage of being hard to see. However, it is still my second choice, and properly dressed, and fished with a very fine leader, will take many nice fish.

My third choice is the Fan Wing Royal Coachman. This fly was never supposed to represent any particular family but I believe it is taken by fish for the Lepidoptera, large-winged moths and butterflies. It seems to be very successful when these are about in the evening.

My fourth choice is the Furnace Spider. This fly I tie on a size 16 short shank hook, by winding only about three turns of a furnace saddle hackle, with fibers about three fourths of an inch long. Tied in this manner, without any body or tail, the fly will alight on the water with the hook down, and looked at from beneath, against the light, only the little black spot will be noticeable. This I believe represents some of the order Coleoptera (beetles) and also the small black gnat (Empidae). I know if no other ways to tie the Black Gnat small enough to represent the natural insect, and even on the very smallest hook, the artificial is usually many times larger than the natural. The small black centre of the furnace saddle hackle tied in this manner seems to represent the size of the natural very {65} closely. This fly is a very good floater and an excellent fly when trout are feeding on those small insects.

My fifth choice is the Grannon. This fly is of the order of Trihoptera, and has different shaped wings than any of those previously mentioned, the wings being quite full and roof shaped. It is on the water a good part of the season, and can be used when other flies with this shape wing are about, such as the alder fly, cinnamon fly, etc.

My next and sixth choice of dry fly would be the Brown Palmer, made on a size 12 long shank hook with a full body of peacock herl, and palmer hackle, wound not too full. This I believe is taken by the trout for many of the caterpillars.

My personal choice of these six patterns should now appear quite obvious, should it be necessary for me to limit myself to such a small selection. I have selected one each of the six most prominent orders, and should any one of the hundreds of families of these orders be in prominence on the water, I would at least have the correct size or color.

My choice of the standard pattern wet flies, Feather Streamers, Bucktail Streamers, and nymphs would be a little more difficult. I am a firm believer that color plays a very important part in the dressing of wet flies, as well as size and style. I offer my personal choice of these styles because of the consistency with which they {66} have taken fish for me during many years of fishing all parts of the country.

I do not hesitate to say that I have taken more trout, of all kinds, on a brown hackle with peacock herl body, than any of the other common wet fly patterns. This is probably because I have used it more. I do believe that in the north, and especially for brook trout, a fly with a little red in it is more productive. Therefore, for northern fishing I would select Royal Coachman, Parmachene Belle, and Montreal. Other favorite flies that are good most anywhere in North America are Grizzly King, Queen O'Waters; Cahill, and Grey Hackle.

Feather Streamers and Hair Streamers are being more extensively used each year. Many authorities are of firm conviction that these flies unquestionably represent small minnows, upon which the fish are in the habit of feeding. This may be true, but I have seen many rubber, metal and composition minnows, that were exact replicas of the naturals, both as to color and size, and they would not take fish as would the Feather or Hair Streamers, fished in the same waters at the same time.

Most of my experience with Feather Streamers and also Hair Streamers has been for Landlocked Salmon and Rainbow Trout, in big waters. So I will list these according to the way they have produced for me. The {67} Black Ghost on a #4 long shank hook has been my most successful Feather Streamer. Probably because its white streamers are easily seen by the fish. It will most always raise fish, even if not the proper fly to make them strike. The Grey Ghost is another, and one of the most popular streamers in the North for Landlocked Salmon. This fly, as well as the Supervisor, Spencer Bay Special and numerous other flies of this style, were originally designed by their creators to represent the smelt, a favorite food of the salmon. These flies vary so in their color combinations that I wonder what the fish do take them for. However, I do know that a Grey Ghost will work when a Supervisor will not, and vice versa. One is grey and the other is blue. When fishing in lakes with a Feather Streamer for trout I have consistently had most luck with a creation of my own, Gregg's Demon. This fly was never tied to represent anything, but I have taken many nice fish on it, and have seen little fellows hardly as long as the fly itself chase it, and try their best to bite it in two. There is just something about it that has "fish appeal."

A Brown Bucktail with a silver body on a #6 3x long shank hook rates number one in Bucktail streamers. Another excellent fly that has been a favorite for years, is a Yellow and Red Bucktail, with a silver body, the red only a narrow streak through the centre. This fly has recently been named "Mickey Finn." A red and {68} white, with silver or gold body is a real good pattern where there are brook trout, and tied on a large hook is very good for bass.

I use one with all white bucktail and silver body, the same as I do a Black Ghost, for locating fish. I find they will most always show their presence, one way or another when a white fly is cast near them.

An all yellow with black streak in the centre same as the "Mickey Finn" is another very good combination. This is an excellent pickerel and bass fly. In fact, most any of these Feather Streamers and Bucktail Streamers tied on larger hooks, and used with or without a spinner, are excellent lures for both bass and pickerel.

Nymphs: I have explained elsewhere my liking these lures, and can say little more except that I always carry the following color combinations in various sizes. All tied according to styles illustrated in the diagrams. Cream Belly with Dark Back; Yellow Belly with Black Ribs and Dark Back; Green Belly with Dark Back; Grey Belly and Gold Ribs with Dark Back; Brown Belly and Gold Ribs with Black Back; Orange Belly and Black Ribs with Dark Back.

{69}

[Transcriber's Note: Some of the names are not in strict alphabetical order.]