WeRead Powered by ReaderPub
The filtration of public water-supplies / Third edition, revised and enlarged. cover

The filtration of public water-supplies / Third edition, revised and enlarged.

Chapter 76: WORMS TILE SYSTEM.
Open in WeRead

About This Book

This book presents a practical, engineering-focused treatment of water filtration for municipal supplies, combining historical perspective, design principles, and operational guidance. It explains types of filters, construction of beds and underdrains, selection and grading of sands and gravels, rates of filtration, head loss, and mechanisms for regulating flow. Procedures for cleaning, sand-washing, and intermittent operation are described alongside theoretical and bacteriological considerations that bear on efficiency. Methods for measuring and removing turbidity and color, the effects of suspended mud, coagulation practices, and numerous design examples and appendices illustrate how to plan, build, and maintain effective filtration works.

WORMS TILE SYSTEM.

This system, invented and patented by Director Fischer of the Worms water-works, consists of the filtration of water through artificial hollow sandstone tiles, made by heating a mixture of broken glass and sand, sifted to determined sizes, to a point just below the melting-point of the glass, in suitable moulds or forms. The glass softens and adheres to the sand, forming a strong porous substance through which water can be passed. These tiles are made hollow and are immersed in the water to be treated, the effluent being removed from the centre of each tile. They are connected together in groups corresponding in size to the units of a sand-filtration plant. They are washed by a reverse current of filtered water. These tiles have been used for some years at Worms, Germany, and at a number of smaller places, and were investigated experimentally at Pittsburg. Some difficulty has been experienced in getting tiles with pores small enough to yield an effluent of the desired purity, and at the same time large enough to allow a reasonable quantity of water to pass. In fact, with other than quite clear waters, it has not been found feasible to accomplish both objects at the same time, and it has been necessary to treat the water with coagulants and preliminary sedimentation or filtration before applying it to the tiles. The problem of making the joints between the tiles and the collection-pipes water-tight when surrounded by the raw water also is a matter of some difficulty.