• Dado, 56, 80.
    • See also Joint, Dado.
  • Dado-plane, 80.
  • Dam, Splash, 20, 21.
  • Decay, 32, 45.
  • Decking logs, 13.
  • Demonstration seats, 143.
  • Derrick, Locomotive boom, 25.
  • Destructive lumbering, causes of, 7.
  • Die, 141.
  • Die-holder, 141.
  • Dividers, 113, 114, 137, 140.
  • Dogs, log, 34.
  • Donkey engine, 24.
  • Door, 192, 193.
  • Dovetail-saw, 66, 137, 139.
  • Doweling, 127, 130, 152, 154, 175.
  • Dowel-plate, 139, 140.
  • Dowel-pointer, 83, 139, 175.
  • Dowel-rods, 127, 175.
  • Draw-bolt, 155.
  • Draw-knife, 61, 139.
  • Drawer, 166, 190-192.
    • Guide, 196.
    • Rail, 196.
    • Runner, 196.
  • Drawing-board, 186, 205.
  • Dray-road, 9, 13.
  • Drier, 222.
  • Drill. See Hand Drill.
    • Twist, 84, 85, 138, 141.
  • Drive, The log, 16-18.
  • Duplicate parts, 155, 204.
  • Duster, Bench, 121, 137, 139.
  • Dynamite, 21.
  • Edge action, 52.
  • Edged Tools, 51 ff.
  • Edger, 35, 36, 37.
  • Eight-square scale, 108.
  • Egg-shell finish, 94, 216.
  • Equipment, Chap. VI, 136-150.
  • Escutcheon of lock, 133.
  • Expansive-bit, 84, 87, 137, 140.
  • Falling beds, 24.
  • Fastenings, Chap. V, 123-135.
  • Felling trees, 10, 11, 23.
  • Ferrule, 54.
  • File, 90, 91, 137, 140, 142, 147.
  • File-card, 91, 137, 140.
  • Filing a saw, 67.
  • Filletster, 80, 137, 139.
  • Filler, 213, 221.
  • Finishing, Wood, Chap. X, 209-223.
  • Firmer-chisel,
    • See under Chisel.
  • Firmer-gouge,
    • See under Gouge.
  • Fish glue, 129.
  • Fitter, 10.
  • Flooring, 30, 42, 174, 201, 206.
  • Flume, 21, 22.
  • Foerstner Auger-bit, 84, 87.
  • Foot-stool, 186.
  • Fore-edge, 196.
  • Fore-plane,
    • See under Plane.
  • Framed structures, 195-201.
  • Framing-chisel,
    • See under Chisel.
  • Frog, Plane, 70, 75.
  • Fuming with ammonia, 212, 214.
  • Furring, 201.
  • Gages, 114-116.
    • Chisel, 69.
    • Cutting, 116, 140.
    • Marking, 114-116, 136, 139, 203.
    • Mortise, 116, 140, 161.
    • Pencil, 115.
    • Screw, 116, 126.
    • Slitting, 116.
    • Twist-drill, 116.
    • Wire, 116.
  • Gelatin, 128.
  • Gimlet-bit, 84, 85, 137, 140.
  • Glass-cutter, 138, 141.
  • Glaziers points, 125.
  • Glue, 128-131.
    • Fish, 129.
    • Liquid, 129.
    • Preparation of, 129.
    • Tests of, 129.
  • Glue-pot, 129, 138, 141, 149.
  • Gluing, Directions for, 130, 153, 167-170, 173, 189, 190.
  • Golden Oak, 211.
  • Gouge, 59, 60, 137, 140, 183.
  • Grading of lumber, 38.
  • Grain of wood, 60, 75, 172, 185, 186, 192, 205, 209, 210.
  • Green, 209.
  • Grinder or Hog, 41.
  • Grinder, Empire Tool, 61, 120, 121, 137, 140.
  • Grinding of tools. See sharpening.
  • Grindstone, 117-120, 137, 140.
  • Groove for drawer, 191.
  • Groove for panel, 164.
  • Groove, Triangular, 66, 156, 158, 159, 161.
  • Hack-saw, 137, 141.
  • Hammer, 58, 94, 95, 96, 136, 139.
    • Ball-peen, 142.
    • Bell-faced, 95.
    • Riveting, 141.
  • Hand-drill, 104, 138, 141.
  • Handscrew, 101, 102, 138, 141, 170, 173.
  • Handscrew, Iron, 102.
    • See also Clamp, carriage-makers.
  • Hatchet, 88.
  • Hauling logs, 13, 15, 22, 23.
  • Hinges, 131-133.
  • Hinges,sizes of, 131.
  • Hinging, Directions for, 132.
  • Hog, 41.
  • Holding tools, 97-105.
  • Honeycombing, 46.
  • Horse, 65, 100.
  • Horsehair, 200.
  • House construction, 200, 201.
  • Ice-road, 14.
  • Impregnation of timber, 47.
  • Iron acetate, 211, 212.
  • Iron, Soldering. See copper.
  • Jack-ladder, 32.
  • Jack-plane. See Plane.
  • Jam, log, 18, 19, 21.
  • Japan, 209, 222.
  • Japanese, 69, 97, 189.
  • Joinery, 151.
  • Joint, Beaded, 175, No. 73, 182.
    • Bevel-shoulder, 172, No. 67, 182.
    • Bird's mouth, 172, No. 69, 182.
    • Boat-builders, 152, No. 7, 177.
    • Brace, 171, No. 65, 182.
    • Brace, Housed, 172, No. 66, 182, 207.
    • Bridle, 172, No. 68, 182.
    • Butt, 155, No. 11, 177, 187, 206.
    • Butt, Doweled, 152, No. 8, 153, 177, 194.
    • Caulked, 157, No. 22, 178.
    • Checked, 157, No. 21, 178.
    • Cogged, 157, No. 22, 178.
    • Corked, 157, No. 22, 178.
    • Column, 169, No. 52, 181.
    • Cross-lap, 155, No. 14, 177.
    • Dado, 158, No. 25, 179, 191.
    • Dado and rabbet, 158, No. 26, 179, 187.
    • Dado, Dovetail, 158, No. 28, 179, 191, 206.
    • Dado, housed, 158, No. 25, 179, 187, 207.
    • Dado, tongue, and rabbet, 158, No. 27, 179, 191.
    • Dovetail, Blind miter, 167, No. 51, 180, 188.
      • Half-blind, 166, No. 49, 180.
      • Lap, 166, No. 49, 180.
      • Secret, 167, No. 51, 180, 188.
      • Stopped lap, 166, No. 50, 180.
      • Thru multiple, 165, No. 48, 180, 187, 206.
      • Thru single, 165, No. 47, 180, 194.
      • Doweled, 175, No. 75, 182.
    • Draw-bolt, 155, No. 10, 177.
    • Edge-to-edge, 172 (70)-174.
    • End-lap, 156, No. 16, No. 17, 178, 194, 206.
    • Fillistered, 174, No. 71, 182.
    • Fished, 151, No. 2, 177, 207.
    • Forked tenon, 157, No. 23, 178.
    • Gain, 159, No. 29, 179, 205.
      • Dovetail, 158, No. 28, 179.
    • Glue, 172, No. 70, 182.
    • Glued-and-blocked, 155, No. 12, 177.
    • Grooved, 157, No. 25, 179.
    • Halved Tee, 156, No. 15, 178.
    • Halving, Dovetail, 157, No. 18, 178.
    • Halving, Beveled, 157, No. 19, 178.
    • Halving, 155-157.
      • See also Joint, Cross-lap, End-lap, Middle lap.
    • Haunching, Table, 164, No. 43, 180.
      • Taper, 164, No. 43, 180.
    • Hopper, 155, No. 13, 177.
    • Lap-dovetail, 157, No. 18, 178.
    • Lapped and strapped, 151, No. 1, 177.
    • Ledge, 157, No. 24, 179, 187.
    • Ledge and miter, 171, No. 58, 181, 187, 206.
    • Matched, 174, No. 72, 182.
    • Middle-lap, 156, No. 15, 178.
    • Miter, 167, No. 52, 181, 187, 194, 206.
      • Double dovetail keyed, 171, No. 57, 181.
      • Double tongue, 171, No. 60, 181.
      • Doweled, 170, No. 53, 181.
      • Lipped, 171, No. 58, 181.
      • Slip dovetail, 171, No. 56, 181.
      • Slip-feather, 170, No. 55, 181.
      • Slip-key, 170, No. 55, 181.
      • Spline, 170, No. 54, 181, 187.
      • Stopped, 171, No. 59, 181.
      • Tongue, 170, No. 54, 181.
    • Mortise-and-tenon, 58, 127, 160-164, 172, 194.
      • Bare-faced, 164, No. 44, 180, 185.
      • Blind, 160, No. 32, 179, 193.
      • Double, 163, No. 41, 180.
      • Dovetail, 162, No. 37, 179.
      • End, 164, No. 46, 180.
      • Foxtail, 162, No. 36, 179.
      • Haunched, 163, No. 42, 180, 193, 196, 207.
      • Housed, 164, No. 45, 180.
      • Keyed, 163, No. 39, 180, 185.
      • Oblique, 172, No. 67, 182.
      • Open, 164, No. 46, 180.
      • Pinned, 162, No. 38, 180, 194, 207.
      • Shoulder, 163, No. 40, 180.
      • Stub, 160, No. 30, 179.
      • Thru, 160, No. 31, 179.
      • Tusk, 163, No. 40, 180, 207.
      • Wedged, 128, 162, Nos. 34 and 35, 179.
    • Notched, 157, No. 20, 178.
    • Notch, Double, 157, No. 21, 178.
    • Rabbet, 157, No. 24, 179, 174; No. 71, 182, 187.
    • Rebated, See Joint, Rabbet.
    • Rubbed, 172, No. 70, 173, 182, 205.
    • Scarf, 151, Nos. 4, 5, 6 and 7, 177, 204, 207.
    • Slip, 164, No. 46, 180, 194.
    • Spliced, 151, Nos. 4, 5, 6, 7, 177, 204, 206, 207.
    • Spline, 175, No. 74, 182.
    • Squeezed, 172, No. 70, 174, 182.
    • Stretcher, 171, No. 61, 181.
    • Strut, 171, No. 62, 181, 207.
    • Thrust, 171, Nos. 63 and 64, 181, 207.
    • Tie, 171, Nos. 63 and 64, 181.
    • Toe, 171, Nos. 63 and 64, 181.
    • Toe-nailed, 154, No. 9, 177.
    • Tongue-and-groove, 174, No. 72, 182.
  • Jointer-plane, 72.
  • Jointing a saw, 68.
  • Joints, Chap. VII, 151-182.
    • Beveled, 167-172.
    • Butt, 152-155.
    • Dovetail, 164-167, 204.
    • Halving, 155-160, 203, 204.
    • Heading, 151-152.
    • Mortise-and-tenon, 58, 127, 160-164, 172.
  • Joists, 201.