As a substitute for a proof cyanotype or blue prints may be used for preparing drawings for photo-lithography and other graphic arts. When a photo-lithograph like a pen and ink drawing is to be prepared from a coloured picture, or from a sepia or Indian ink wash drawing of a plastic object or a photograph from nature, or from an object not suitable for photographic reproduction an autotypic transfer is to be prepared, a proof of the desired object must be first prepared, and then from this the drawing is to be made. It is obvious that the proofs of the first-named can only be made in the original size, which under some circumstances may not be just what is required, assuming that the original can be used in this way. In all cases this will be inconvenient and tedious, and possibly from the nature of the drawing many proofs be lost. The end will be attained far more quickly and safely if a negative is made of the original, either of the same size or enlarged according as may be desired. The negative thus obtained is used to make a ferro-prussiate print. {24} For this we use a good firm drawing paper, which is sensitized in the following mixture:—
Solution A. | ||
Potassium ferridcyanide |
8 |
parts. |
Water |
150 |
parts. |
Solution B. | ||
Ammonio-citrate of iron |
10 |
parts. |
Water |
100 |
parts. |
When dissolved each solution is filtered and mixed in the dark room immediately before use in equal parts. The solution thus formed is sensitive to light and is spread on a well-sized drawing paper as evenly as possible with a broad brush, equalized with a distributing brush, and then dried in the dark room.
The coated side of the paper appears yellowish. It is then printed as usual until the deepest parts look grey, as the prints look weaker after developing. The prints are developed by floating them face downwards on a dish of pure water not too cold, and then washed till the drawing appears quite white on a blue ground. The washing must be thoroughly done or else the prints turn blue afterwards when exposed to light. These prints contain all the finest details, even in the deepest shadows, plainly visible, and will now be the most, perfect and most convenient proofs for the artist. The tracing or drawing is now done with good black dull surface ink as already suggested. When the drawing is done it is allowed to dry thoroughly, which will be in from two to three hours. The following solution should be prepared:—
Oxalic acid |
1 |
part |
Water |
10 |
part |
which should be poured into a flat dish and the drawing allowed to lie in it for about thirty minutes. It is then again well washed and then immersed for fifteen minutes in a bath of
Hydrochloric acid |
1 |
part |
Water |
20 |
part |
The blue colour will now have disappeared, and the ink drawing will appear pure black on the white paper. It should be now hung up and dried in the ordinary way. This drawing prepared in wash or line with ink now forms the original for a further photographic negative, which is made in the correct size of the reproduction with or without the intervention of the crossed screen according to the character of the drawing. With the negative thus obtained a photo-litho on stone or zinc, or a typographic copper or collotype plate, or a photograph on wood for xylography may be prepared.
The use of this process appears specially important for those cases in which an ordinary photographic negative is not sufficient, {25} for example where a printing plate cannot be prepared from the negative. It ought also to be useful when the light could not be controlled in making the negative, and thus incorrect effects appear in the reproduction, which often occurs in negatives from nature and with polished plastic metal objects. The enlargements from the original are then used because the details can be better seen, and the artistic character can be more easily seen. The fineness of the drawing must obviously be in proportion to the after reproduction, while tones may be partly or entirely lost.