“The A B C of Iron and Steel,” Penton Publishing Co., Cleveland.
“The Steel Foundry,” J. H. Hall, McGraw-Hill Book Co., New York.
“The Metallurgy of Steel,” H. M. Howe, The Scientific Publishing Co., New York.
“The Manufacture and Properties of Iron and Steel,” H. H. Campbell, Hill Publishing Co., New York.
“The Metallurgy of Iron and Steel,” B. Stoughton, McGraw-Hill Book Co., New York.
“The Metallurgy of Steel,” Harbord and Hall, Charles Griffin & Co., Ltd., London.
“Liquid Steel,” E. G. Carnegie, Longmans, Green & Co., London.
“Krupp’s Steel Works,” F. C. G. Muller, Wm. Heinemann, London.
“By Bread Alone” (a novel), I. K. Friedman, McClure, Phillips & Co., New York.
“The History of the Manufacture of Iron in All Ages,” James Swank, Am. Iron and Steel Assoc., Philadelphia, Pa.
“The Materials of Engineering—Iron and Steel,” Robert Thurston, John Wiley & Son, New York.
“The Honorable Peter White,” R. D. Williams, Penton Publishing Co., Cleveland, O.
“The Iron Ore Resources of the World,” International Geological Society, Stockholm, 1910.
“The Story of Coal and Iron in Alabama,” Ethel Armes, Chamber of Commerce, Birmingham, Ala.
“Modern Coking Practice,” T. H. Byrom, C. Lockwood & Son, London.
“Coal and Coke,” Frederick H. Wagner (1916), McGraw-Hill Book Co., New York.
“Washing and Coking Tests of Coal,” A. W. Belden, G. R. Delamater, J. W. Groves, Bulletin 368, U. S. Geological Survey, 1909.
“Washing and Coking Tests of Coal and Cupola Tests of Coke,” R. Moldenke, A. W. Belden, and G. R. Delamater, U. S. Fuel Testing Plant, St. Louis, Mo., U. S. Geological Survey, Bulletin 336, 1908.
“Manufacture of Coke and Other Prepared Fuels and the Saving of By-Products,” John Fulton, 1905, International Text Book Co., Pittsburg, Pa.
“The Blast Furnace and Manufacture of Pig Iron,” Robert Forsythe, D. Williams & Co., New York.
“A Study of the Blast Furnace,” Harbison-Walker Refractories Co., Pittsburg, Pa.
“The Principles of Manufacture of Iron and Steel,” Sir I. L. Bell, George Routledge & Son, London.
“The Business Message of the Wrought Iron Bar,” Interstate Iron and Steel Co., Chicago.
“The Control of Quality in Every Process,” A. M. Byers Co., Pittsburg, Pa.
“The Cementation of Iron and Steel,” Gioletti, McGraw-Hill Book Co., New York.
“The Fine Steel Industry,” J. A. Mathews, The Halcomb Steel Co., Syracuse, New York.
“Sir Henry Bessemer—An Autobiography,” Offices of Engineering, London.
“The Romance of Iron and Steel—The Story of a Thousand Millionaires,” H. N. Casson, Munsey’s Magazine, April, 1906, and on; In book form, A. S. Barnes & Co., New York.
“The Manufacture of Open-Hearth Steel Castings,” W. M. Carr, Penton Publishing Co., Cleveland.
“The Basic Open-Hearth Steel Process,” C. Dichmann, Constable & Co., Ltd., London.
“A Study of the Open-Hearth,” Harbison-Walker Refractories Co., Pittsburg, Pa.
“Cast Iron in the Light of Recent Research,” W. H. Hatfield, Charles Griffin & Co., Ltd., London.
“Cast Iron,” W. J. Keep, John Wiley & Sons, New York.
“The Metallurgy of Cast Iron,” T. D. West, Cleveland Printing & Publishing Co., Cleveland, O.
“American Foundry Practice,” T. D. West, John Wiley & Sons, New York.
“The Production of Malleable Castings,” Richard Moldenke, The Penton Publishing Co., Cleveland.
“Malleable Cast Iron,” S. J. Parsons, A. Constable & Co., Ltd., London.
“Electric Furnaces in the Iron and Steel Industry,” Rodenhauser & Schoenawa (Translated by Vom Baur), John Wiley & Sons, New York.
“The Electric Furnace,” A. Stansfield, The McGraw-Hill Book Co., New York.
“Electric Furnaces for Making Iron and Steel,” Lyon and Keeney, U. S. Bureau of Mines, Bulletin No. 67 (1914).
“The Manufacture and Uses of Alloy Steels,” H. D. Hibbard, U. S. Bureau of Mines, Bulletin No. 100 (1915).
“High Speed Steel,” O. M. Becker, McGraw-Hill Book Co., New York.
“Nickel Steel—Its Practical Development in the United States,” H. F. J. Porter, Cassier’s Magazine, 1902, Page 480.
“Chrome-Vanadium Steel,” W. E. Gibbs, Cassier’s Magazine, June, 1910, Page 174.
“Vanadium Steels,” J. Kent Smith, American Vanadium Co., Pittsburgh, Pa.
“Alloy Steels in Motor Car Construction,” J. A. Mathews, Journal Franklin Institute, May, 1909, Page 379.
“On the Art of Cutting Metals,” F. W. Taylor, Trans. Am. Soc. Mech. Eng. 1906–28 No. 3.
“High Speed and Carbon Tool Steels,” Machinery Reference Series No. 117, Industrial Press, New York.
“Alloy Steels,” Machinery Reference Series No. 118.
“Drop Forging, Die Sinking and Machine Forging of Tools of Steel,” J. V. Woodworth, N. W. Henley Publishing Co., New York.
“Metal Working,” Hasluck, David McKay, 1907.
“Drop Forging,” Machinery’s Reference Series No. 45.
“Press Working of Metals,” Oberlin Smith, John Wiley & Sons (1913).
“The Rolling Mill Industry,” F. Kindl, Penton Publishing Co., Cleveland, Ohio.
“Wire Manufacture and Uses,” J. B. Smith, John Wiley & Sons, New York.
“Modern Welded Pipe,” National Tube Co., Pittsburg, Pa.
“The Control of Quality in Every Process,” A. M. Byers Co., Pittsburg, Pa.
“Seamless Tubing, Bulletin No. 17–A”, National Tube Co., Pittsburg, Pa.
“The Manufacture of Iron and Steel Tubes,” E. C. R. Marks, Van Ostrand & Co., New York.
“The Metallography of Steel and Cast Iron,” H. M. Howe, McGraw-Hill Book Co., New York.
“The Metallography and Heat Treatment of Iron and Steel,” Albert Sauveur, Sauveur and Boylston, Cambridge, Mass.
“Metallic Alloys: Their Structure and Constitution,” G. H. Gulliver, Charles Griffin & Co., Ltd., London.