JELLY STRAINER NO. 1

An old chair is generally used to hang the jelly bag over while the juice is dripping. As a substitute the device shown in the following illustration is suggested as being more convenient and sanitary in every way. It not only provides a place for the bag to hang, but it also has a shelf on which the pan sits to catch the drippings from the bag. The legs are adjustable; hence it is easily taken apart and kept in a small space. This makes the strainer especially convenient to the Canning Club Agent as she goes her daily rounds teaching the housekeepers the art of jelly-making. It can be easily made at home and at a little cost.

Materials:

jelly strainer

strainer plans

Dimensions:

Directions:

Bevel the tops of all 4 of the legs at an angle of 45°. Make the upper shelf of the 4 pieces measuring 1” × 1½” × 7”. Measure 2¼” from the tops of the 4 legs and screw the upper shelf to the legs at these points. A solid piece of wood with a hole in the center may be used in making this shelf. Support this upper shelf by screwing the four triangular braces (1” × 2½” × 3”) in the corners of the shelf. Use the 8 1-inch No. 9 screws for this purpose. Saw the lower shelf out 1½” on each corner and screw it on the legs at a distance of 9” from the bottom of the legs. Sandpaper but do not stain. Take a piece of flannel of the desired size and make the jelly bag in the shape of a triangle. Sew a loop of tape at each corner to hang the bag over the posts.